Skip to content


Your cart is empty

Garment Care


General wear and tear may occur depending on individual use of all our outerwear (crewnecks, fleece, hoodies).

Please follow the below instructions carefully to protect your garment:

  • Either hand wash or gentle cold wash your garment inside out
  • Avoid any friction/ rubbing against the garment and print
  • Do not dry clean your garment
  • Do not bleach or use any harsh detergents
  • Dry flat in the shade
  • Do not tumble dry
  • Do not iron the print or embroidery 


  1. Clean out your sink of any filth
  2. Fill sink with slightly warm water and laundry powder/detergent
  3. Rub area of hat that needs cleaning
  4. Leave to soak for a further 5 mins - MAKE SURE YOU RINSE IN COLD WATER BEFORE ATTEMPTING TO DRY!
  5. Take out and drip dry inside (away from sun)
  6. Once the hat is almost dry, but still slightly damp, grab a blow dryer and blow dry the INSIDE of the cap, not the outside to ensure no fading. Ensure the blow dryer is set to cool.
  7. Hang back up to finish drying
  8. Blow dry on cool the INSIDE of the cap to reshape back to perfect.


  • Hand wash in cold water
  • Air dry
  • Do not bleach
  • Do not tumble or spin dry
  • Do not dry clean
  • Avoid rough surfaces

Please contact us at if you require any further assistance with looking after your garments.